How to Check Your SSD Health on Windows (and Fix Drivers That Wear It Out)
Check your SSD's remaining life in Windows Settings or with free tools, find out what TBW means, and see whether the reported Nvidia driver bug is writing gigabytes to your drive.

In this post7 sections
Learning how to check SSD health on Windows takes about two minutes, and November 2026 gave everyone a reason to do it. Users reported that some Nvidia GeForce drivers keep writing gigabytes of data to the drive while the PC just sits idle, and AMD fixed a similar bug in its Radeon drivers the same month.
Every SSD can only handle a certain amount of writing before it wears out. A background service that writes for no reason uses up that allowance. Below is how to read your drive's health, what the numbers mean, and how to check whether a graphics driver is behind the writes.
The fastest check is already in Windows Settings
Windows has a built-in drive health page. It's easy to miss because it sits three menus deep. On Windows 11:
- Open Settings > System > Storage.
- Scroll down and click Advanced storage settings, then Disks & volumes.
- Pick your SSD and click Properties.
- Look at the Drive health section.
On Windows 10 the path is Settings > System > Storage > Manage disks and volumes > Properties.
According to Microsoft's support page, you'll see three numbers:
- Estimated remaining life: how much of the maker's predicted lifespan is left. A new drive shows 100%.
- Available spare: spare memory cells the drive keeps in reserve to replace worn ones, from 0% to 100%.
- Temperature: in degrees Celsius.
The catch is that Windows only monitors NVMe SSDs, the small stick-shaped drives that plug straight into the motherboard. If you have a 2.5-inch SATA SSD or an old hard drive, the Drive health section won't appear at all. Use one of the options below instead.
CrystalDiskInfo shows how much your drive has written
CrystalDiskInfo is a free, long-running Windows tool that reads the health data your drive keeps about itself, called SMART data. It works with SATA and NVMe drives. NVMe support needs Windows 10 or later.
- Download the Standard edition from the official crystalmark.info site, not from a mirror site.
- Open it. The big box at the top left shows a health status such as Good, Caution or Bad, with a percentage.
- Note the Total Host Writes figure. That's how much data your PC has written to the drive in its lifetime.
- Check the temperature next to it.
Your SSD maker's own app usually shows the same data. Samsung, WD, Crucial and most other big brands offer a free one.
No downloads: use PowerShell
Open PowerShell and run Get-PhysicalDisk | Select FriendlyName, MediaType, HealthStatus to see whether each drive reports Healthy, Warning or Unhealthy. Adding | Get-StorageReliabilityCounter | Select DeviceId, Temperature, Wear after Get-PhysicalDisk shows wear as a percentage used, which is the reverse of Settings' remaining-life figure.
SSD TBW meaning: your drive's write allowance
TBW stands for terabytes written. It's the total amount of data the maker says the drive can take during its warranty. You'll find it on the spec sheet or warranty page for your model. For example, a 1TB Samsung 990 Pro is rated for 600TBW.
To estimate how much life you have left, compare your Total Host Writes in CrystalDiskInfo against that rating. Normal home use is usually well under the limit. Some guides suggest planning a replacement once remaining life falls below about 10%. If Windows shows a critical warning such as "reliability is degraded" or "drive is set to read-only", back up your files straight away. Software can't repair that.
What the Nvidia driver bug reportedly does
This part is reported, not confirmed. According to Hardware Busters and Tom's Hardware, users traced heavy idle writes to NVDisplay.Container.exe. This process belongs to the NVIDIA Display Container LS service, and it keeps rewriting a log file called nvlog.nvlgstg.
- One forum user says the problem started with driver 621.14 (released 4 November 2026) and continued on 621.24 (12 November). On the earlier 621.01 driver, the same user logged under 2MB of writes every five minutes.
- That user measured about 30GB an hour on 621.24, even with telemetry turned off in the Nvidia App.
- Wccftech reproduced it on an RTX 4090 at a lower rate of about 1.43MB a second, or roughly 5.2GB an hour if it kept going.
- Other users on Reddit saw no problem at all. Nvidia had not publicly acknowledged the issue, and the 621.24 release notes don't list it.
For scale, Hardware Busters worked out that 30GB an hour on a PC left on around the clock adds up to more than 260TB a year. That's close to half the 990 Pro's 600TBW rating. These figures come from Windows' write counters, which count write requests rather than actual wear on the memory chips, so real damage may be lower.
AMD users: update to Adrenalin 26.11.1
AMD confirmed a similar problem in its External Events Utility (atieclxx.exe) on the 26.10.1 and 26.10.2 drivers. It hit Radeon RX 7000 and RX 9000 cards. The fix arrived in Adrenalin 26.11.1, an optional driver dated 12 November 2026, as Igor's Lab reported. It's optional, so AMD Software may not offer it automatically. Download it from AMD's site. If you disabled the External Events service as a workaround, turn it back on afterwards, because FreeSync and Radeon hotkeys depend on it.
What to do now
Write down your SSD's remaining life and Total Host Writes today, then check again in a week. If the writes jump by hundreds of gigabytes while you've barely used the PC, run the Resource Monitor check above. Nvidia users should watch the release notes for the next GeForce driver after 621.24 and only update once a fix for idle SSD writes is listed.
Sources
- Microsoft Support: What to do about a critical warning for a storage device
- Nvidia: Driver Rollback Instructions
- CrystalDiskInfo (Crystal Dew World)
- Hardware Busters: GeForce driver bug reportedly piles idle writes onto SSDs
- Tom's Hardware: Nvidia GeForce driver bug reportedly hammers SSDs with up to 30GB of writes per hour
- Igor's Lab: AMD Adrenalin 26.11.1 fixes excessive SSD writes
- Help Desk Geek: AMD addresses Radeon driver bug causing excessive SSD writes
- Box.co.uk: How to Check SSD Health in Windows 11
Found this useful? Send it to someone who should read it.


